I make an order one monitor dell e190s from supplier
how to check monitor model?
when I type "run" command "dxdiag" on display tab I found monitor model: dell E198fp
Pls advise model: dell e198fp is dell e190s or they's different?
Pls advise via email: <ADMIN NOTE: Email id removed per privacy policy>, thanks.
Hi,
I had problem with my Dell U2913WM which i bought last week.
I managed to use it on VGA cable for few days.. But today the monitor suddenly switch to blank screen and popping out this message
"Dell U2913WM
There is no signal from your Video Source.
Press the monitor button now to select the correct input source
input source on the On-Screen-Display menu."
The problem im facing now is when i press there monitor button, the selection menu is no longer popped up like last week when i chose to use VGA mode.
It just showed Arrow UP, Arrow Down, Tick, Cross, but no more menu displayed out for me to select. 
I am quite frustrated with this, this monitor just arrived last week and been using for few days, now it is like useless monitor keeps on popping out the error message.
Can anyone help me with this problem?
Thanks in advance.
Regards,
James
My S2340MC monitor does not seem to be working anymore. I've tried it with different VGA cables and different computers and it does not work, so it is definitely a monitor issue. I got it for Christmas last year and are wondering if I'd be able to get it replaced. It was bought from Best Buy, I still have the invoice from it, but it seems there was a misprint on the invoice as it says S2240M so I'm hoping this won't be an issue, but it is my invoice for this monitor. This isn't a tech issue I'm asking about a replacement.
I received my two new Dell UltraSharp 24" ( U2414H ) monitors today to be attached to my Microsoft Surface Pro 2 ( 512Gb / 8MB ) and docking station. I ordered these monitors because they are designed to use in a display port daisy chain arrangement. So I set them up as following, plugged micro-display port into the Surface Pro 2 dock then plugged the other end of the cable with the full sized display port into the display port ( IN ) port on monitor one ( 1 ) and then plugged another display port cable into monitor one ( 1 ) display port ( OUT ) then into monitor two ( 2 ) display port ( IN ). Both monitors display beautifully, but not as I was expecting.
I feel like I am missing something here but don't know where to start. I was expecting the display settings in control panel to show three ( 3 ) displays, the Surface Pro 2 display and the 2 Dell external displays. But what I am seeing is the Surface Pro 2 display and the 2 Dell U2414H monitors as a single display. What I wanted to do duplicate the start screen on the first Dell U241H monitor and then extend the desktop to the second Dell U2414H monitor. But I can not see how to make this all work. Has anyone daisy chained 2 external monitors like this and if so how did you get them setup correctly? Is there something that I need to set on the second monitor in the daisy chain to make Windows see it as a third display panel?
So can someone help me please...
Orgbrat
Hi there,
Yesterday I contacted Dell Australia about returning my monitor that I purchased because of financial reasons and everything seemed to go alright. The Dell rep told me that the return would have to get authorised, which is fine, and was told that I'd be contacted tomorrow about whether the return of my monitor has been authorised or not. My question is, how long does it take for Dell to authorise product returns?
Thanks in advance for any help.
P.S. Sorry for the bother.
Hello,
I own a U2913wm Rev A00 and I'd like to know what upgrades were done in Rev A01, A02, etc. Unfortunately, I could not find any Info about this in the Dell Website. Is it recommended to change A00 for newer revisions?
Thank you
Initially it came up, with a blank screen with the blue power lamp hard on, button could not be turned off. Tripped the power a few times, and the monitor was dead. Unplugged the power cable and bypassed the power board and same issue.
Cannot find the manuals for this monitor online, but think the fuse has blown. Does anyone know how to open up the monitor to see if the fuse has blown and replace it.
DELLs response, was there is no-one, and no redirect way to RTB and get the monitor services. Swap out and replace is their only suggestion / answer.
Hi,
I ordered an U2713h to Dell the last week, and today I received an U2713hb (made in China the November 2012, Rev A01 ).
Does somebody know what mean the "b" after the model name (U2713h) , it's like a new revision?
I will try this monitor this WE, hoping that is a revision without problems like USB3 or density and color shifts reads in some forum and dell forum (http://en.community.dell.com/support-forums/peripherals/f/3529/t/19489601.aspx)
Thanks
Salvo
For this Ultra HD display: http://www1.la.dell.com/bz/en/corp/peripherals/dell-up2414q/pd.aspx?refid=dell-up2414q&s=corp
Since I'm splurging for this display, I'm looking for recommendations on a low cost system to drive it.
Must Have:
Nice to Have:
Don't Need:
Hi,
I have just upgraded from a BenQ 1920x1080 HDCP-compatible monitor to the Dell U2913WM monitor. The specs tell me it is HDCP-compatible via the DVI-D port, but when using the supplied DVI-D Dual Link cable with my GTX 780 graphics card, the NVIDIA Control Panel tells me that "This display does not support HDCP."
I was using the GTX 780 with my old BenQ monitor (and a single-link DVI cable), so does this mean that the supplied cable is not HDCP-compatible? The 780 also has a DVI-I port, so I have checked (and double-checked) that I am using the right one.
Please help!
Kind regards,
D33T33.
Hello, I got this monitor through amazon in jan 2013. There is this unbearable high pitched sound whenever lots of text is displayed on the screen e.g. wikipedia, email, word docs etc. I have gone through other posts here on this issue and I can see other people having this issue too. My monitor is Rev A00, by the way. I tried contacting technical support on phone but they told me that they have never heard of this kind of issue before, long story short talking to them wasn't a pleasant experience. Will really appreciate if someone here can help me out.
Thanks
I have ordered a U2412M in december. It was ordered directly from dell. I have received the U2412Mb Rev 00. I have noticed online that there is a lot of talk about this "b" version and Rev 00. There is no definitive answer exactly what it means. I have seen Chris saying that b is the location, but I don't see how that has anything to do with it (b would be a version of some type if anything). It was also said that its best to buy it from dell directly. I did that. So what exactly is the status of these b and non b versions?
I'm having the same problem-- next to my iMac, the white looks sepia toned or light blue, but I can't seem to achieve a white without some tinge to it. I'll try some of the above if I can figure them out and report back.
Hi,
I bought a U2713HM in May from an online retailer (not direct from Dell) and have been fine up until recently, but last week I started noticing image retention after leaving it displaying a static image for about 8hours - after running the LCD conditioning program for about 20mins, the problem seemed to disappear.
However, a couple of days ago - I had image retention again, this time with flickering lines appearing after only an hour of showing a static image. Again, 20mins of LCD conditioning seems to have fixed this. Both occasions were from different devices on different inputs (DVI the first time, HDMI the second time). The problem seems to be getting worse.
I noticed that there are similar cases in the past that have been posted on this forum. It is very annoying having to correct with the LCD conditioning program after only a short time of use. I would like to know how I can take steps towards getting this replaced under warranty.
Thanks,
Lloyd
Update:
Could this be a known issue related to my revision number? I am currently at work so I cannot check, I will update this post with my hardware revision when I'm home.
Hello Chris:
I have a similar question as the one posted here but mine is regarding the Panel Revision Numbers for this Monitor U2412M
I read the forums, some of your post and when I called DELL I was also told by the sale representative the advantages of buying directly from DELL instead of a third party seller, specially since I'm located at US.
From one of the post:
...
The product sits in their warehouses getting old. Before too long, they have older revisions A00 while we are shipping A03. (Just examples)
...
I asked the sales representative what panel I would received and he mentioned me that they do not have control over that (which is understandable) but that I will be receiving the latest panel since the old ones were not longer available.
A few days later I received my monitor and to my surprise the Revision Panel is A00 which is the first generation of this panel. I also noticed that the manufacture date of the monitor is November 2013 which does not correlate to the latest revision of the panel being used. My co-worker has the same monitor he purchased in 2012 and his monitor has Revision Number A02.
After receiving the monitors I called at your Sales representative, then I was transferred to Customer Care, then Technical Support and back to Sales representative and no one could tell me the latest revision panel for this monitor, a supervisor mentioned me that he sees different revision numbers but does not know which revision is the newer one or if there are manufacture dates associated with these revision numbers to know if there is a sequence on them (thinking in A00 will be first quarter of 2011, A01 second quarter of 2011 and so on)
They were able to specify the latest revision as A06 but for the DELL u2713hm monitor
As a side note I was looking to get a second monitor to have a dual setup but is there a way to ensure to get the same revision numbers (the latest one) of this monitor if I purchase them together?
I will appreciate if you can clarify the Panel Revision Number for this monitor U2412M and provide me with more details.
Thanks for your help and time
Sincerely
Paul
-----------------------------------------------------------
Ref post:
Why all U2312HM and U2412M monitors reverted to the most bugged A00 revision?
http://en.community.dell.com/support-forums/peripherals/f/3529/t/19520870.aspx
Faulty U2412M replaced by a U2412Mb. What does "b" stand for?
http://en.community.dell.com/support-forums/peripherals/f/3529/t/19459306.aspx
Color differences in the newer U2412m
http://en.community.dell.com/support-forums/peripherals/f/3529/t/19470288.aspx
Reasons you should not buy a Dell monitor from a reseller!
http://en.community.dell.com/support-forums/peripherals/f/3529/t/19531096.aspx
I guess Dell engineers never browse any web pages. Otherwise how could they not find this serious issue? I didn't purchase my U2713H monitor. Dell sent it to me as a replacement for U2711. Right now I'm really <profanity> by this ghosting issue. If you have one of fast scrolling mouses (such as Logitech M705), this becomes painfully irritating. Even using keyboard keys to scroll up/down a page it's quite annoying. 
Any resolution for this issue?
Hi,
For sometime, I thought it might be an hdmi problem, but I ran the selfdiag and got the same result.
I have a thin black line running from side to side in the most upper part of the monitor (Running at 1080P).
Nothing is cut-off, its just like the screen "starts" from that line. Its very thin, hair like, but noticeable.
Is that normal, and only I get annoyed by it, or is it ok & normal?
You can see it pretty good in this shot, especially where the flash reflects (did my best).
Thanks.
Hi,
I have a monitor with serial #: MX-OD325J-74262-98P-1UBL - can anyone tell me what Model it is?
What do i need to do with my monitor now that something is wrong with it. Right side of my monitor has changed its color saturation to reddish/pink. I tried to call dell hotline numbers but i cannot seem to locate a service tag/express tag. All i found is serial number. I bought this monitor from bestbuy last september 2013. I need some help on where to start.
