Hello,
Yesterday I bought three U2414 for my first home multi monitor setup.
Picture is nice, they are looking great (especialy 3 of them in a row), but have a problem with daisy chaining them.
I use Hp Elite Book 8470p with AMD Radeon HD 7570M
In post below You showed configuration that I try to achieve.
I tried nearly everything ( changed drivers, monitor and graphics settings, used different configurations of cables, used other cables - DP to DP, tried only 2 monitor setup, changed monitor drivers to drivers form cd included with monitors and those from dell site etc.)
In Catalyst Control Center there is information that MSTis disabled (I dont know why?)
I checked this - card and monitor of courrse are MST and DP 1.2 compatible - maybe is something wrong with drivers ?
The only thing I see is the same picture on 3 monitors (mirror mode).
Also I can use laptop display with monitors in extended display mode.
I want to see 3 individual monitors in system seetings and in catalyst control center so I can use eyefinity.
Plese help.
Best Regards
Marcin Strus
My curent setup is as You showed in post below:
DELL-Chris Mrobertvan1,
Start with one U2414H #1. Turn the computer and U2414H #1 off.
Computer XFX HD 6670 --> Dell DP to mDP cable --> U2414H #1 mDP
* Turn on the U2414H
* Press the monitor Menu button (3rd from the left) to bring up the OSD (On Screen Display)
* Go to Other Settings
* Go to Factory Reset
* Choose Reset All Settings
* Go back to Display Settings and verify that DisplayPort 1.2 is DISABLED
* Go to Input Source
* Choose Mini DisplayPort
* Exit the Menu
* Turn the computer onAt this point, does the computer and single U2414H operate correctly?
If yes, make sure U2414H #2 and U2414H #3 are also set to Input Source- Mini DisplayPort.
U2414H #1 full size DP Out MST --> DP to mDP cable --> U2414H #2 mDP; U2414H #2 full size DP Out MST --> DP to mDP cable --> U2414H #3.
Once that is setup, U2414H #1 and U2414H #2 must be set to DisplayPort 1.2 Enabled.U2414H #3 must be set to DisplayPort 1.2 DISABLED.