OS: Windows 8.1 Pro x64 (Custom Build)
Video Card: PNY Quadro K2200
Driver Version: 353.30
Video Ports Available: 2 x DP 1.2 and 1 DVI-I DL
Video out port of video card to monitor: DP1 of video card to MiniDP on monitor
Cable Used to attach the video card to the monitor: Cable Matters® Gold Plated Mini DisplayPort to DisplayPort Cable - 4K Resolution Ready
Windows Power Plan: Balanced
Resolution: 3840x2160 , 60Hz
Dell UltraSharp Color Calibration: v1.5.8 | XDR Version: 2.3.8.21
X ========== X
I've followed the instructions here: http://ftp.dell.com/Manuals/all-products/esuprt_display_projector/esuprt_Display/dell-up3214q_User%27s%20Guide2_en-us.pdf
Specifically
1) Factory Reset
2) DP 1.2 Enable
2) Color Settings -> Preset Mode -> Color Space -> CAL1
3) Shutdown PC
4) Unplug powercable
5) Restart machine and launch Dell UltraSharp Color Calibration
This is a brand new monitor and when it gets to patch set measurement. I get the following briefly - http://tinypic.com/r/34qpsvn/8, note: the s/w is not responsive. And then after the white screen step 1 of 6 I think I get the following. VERY frustrating :(.
I am using an x-rite i1 Display calibration hardware.
---------------------------
Dell UltraSharp Calibration Solution
---------------------------
Could not set the display's default luminance.
Error communicating with the display.
Please verify the USB connection.
Power cycle the display, restart the application and try again.
---------------------------
OK
---------------------------