Dear All,
Hope someone could help me with the following couple of items, further to my recent purchase & install of a S2340T Dell multi-touch monitor:
1. I am in the "habit" of registering all my products with their respective manufacturers. Seemingly however, for Dell products to get registered one needs a "Service Tag", and such a Tag is provided only for 27" or larger monitors (smaller ones have only an Order # on their packing boxes).
So how am I to actually register this new and VERY expensive monitor of mine with Dell?
2. I am using the S2340T both as a PC monitor (via the DisplayPort + USB-upstream connectors) AND as a TV monitor (via the HDMI connector); swithching between the two fuctions is done by selecting the input from the buttons on the bottom-right side of the monitor.
Also, sound generated by the PC is handled by the loudspeakers connected to the PC's sound card, while sound generated by the cables box set is handled (via the HDMI connection) by the speakers built into the S2340T's base.
Given the configuration above, here's my question: how can I (at any given moment) control the VOLUME of the built-in loudspeakers when watching TV (volume higher / lower / mute), as there seem to be no volume control buttons on the monitor, and the PC volume controls (from the keyboard) affect the speakers connected to the sound card and not those built into the monitor (despite the USB-upstream connection)?
Any helpful info you could provide on any of the above will be most appreciated.
Happy Weekend,
Eric