Hi,
I received my 2 new U2413 monitors yesterday. I finally figured out how to calibrate them by installing the proper software: Dell UltraSharp Calibration Solution Setup 1.5.3.
Now my issue is that I'm not getting the same calibration options for each monitor.
Monitor #1, which the Dell UltraSharp Calibration Solution is calling "DELL U2413(2) KTXXK418AEFL", after clicking "Display Profiling" from the Home screen offers me White Point options such as CIE Illuminant D65 (ranging from D50 to D75), then Native, Daylight Temperature, xy.. and measure.
Monitor #2, which the Dell UltraSharp Calibration Solution is calling "DELL U2413(2) KTXXK418AEVL", after clicking "Display Profiling" from the Home screen offers me the options I expected from the users guide: AdobeRGB, sRGB, Rec. 601, Rec. 709, SMPTE-C, Native and Custom xy....
Why are they different? I used Native to calibrate Monitor #2 and it adjusted everything automatically. I used CIE Illuminant D65 to calibrate Monitor #1 and it did everything automatically except luminance, which I had to do manually via the monitor controls.
Monitor #1 seems way to hot. It's almost blinding, and the colors seem a bit oversaturated still. It seems the calibration for Monitor #2 was much more thorough (it took much longer and seemed to do everything for me).
Why am I not getting the same options for each?
And finally, I believe I read that if I leave the i1Display Pro plugged in and by the monitors it can adjust the brightness during the day based upon the light in the room. Is this true? If so, what do I need to do to enable this for both monitors?
Sorry this post is so long, and thanks in advance for any and all help.
Sincerely,
Gary